Send us your file and we will print it
Have a design in mind and want to make it real? We print your ideas in hours. We work with PETG and ABS for parts that need mechanical and thermal strength, among other materials.
If you are an engineering student, send us your design and make your project real.
Ideal for logos, complex decorative parts and corporate gifts. We bring your designs to life in full color, without limits!
Looking for keychains, merchandise or parts with visual impact? Thanks to our multi-toolhead technology, we print in several colors at once with flawless finishes and minimal material waste, which lets us offer better prices and record lead times.
If you have the broken part or a hand-drawn sketch, we take care of the rest. Fast solutions for specific problems.
Did a part break and you can no longer find it? We make custom industrial replacement parts.
Visit our Online store to see our original designs, or ask us for that special part your boat needs.
We design and make nautical accessories that withstand sun and salt water.
Give your project the professional level it deserves!
Forget cardboard and glue. We print your models with clean finishes and precise dimensions. Ideal for graduation presentations or projects.
We print mostly in PETG and PLA, and we also work with ABS, ASA, TPU and carbon-fiber or glass-fiber filaments. Choosing the right material is half of making a part that lasts.
| Material | Best for | Strengths | Keep in mind |
|---|---|---|---|
| PLA | Prototypes, models, decorative parts and merchandise | Very good detail and finish, fast printing, affordable | Softens with heat (around 55 to 60 °C): not a good idea to leave it in the sun inside a car |
| PETG | Functional parts, nautical accessories and replacement parts | Resistant to impact, moisture and water; a good balance between strength and ease of printing | Withstands up to about 70 °C and is somewhat less rigid than PLA |
| ABS | Technical parts with mechanical and thermal demands | Resistant to impact and higher temperatures; can be sanded and polished | Needs an enclosed printer and good ventilation; it shrinks as it cools, so it is not ideal for very large parts |
| ASA | Parts exposed to sun and weather | Resists UV rays and higher temperatures (over 90 °C) | Needs an enclosed printer; somewhat higher cost and print times |
| TPU | Gaskets, bumpers, protectors and flexible parts | Elastic, absorbs impact and vibration | Prints more slowly and is not suited to rigid parts |
| Carbon fiber or glass fiber | Lightweight structural parts and brackets | High rigidity and dimensional stability | Higher cost and a matte finish |
Values are approximate: they vary with the filament brand, the design and the thickness of the part. If in doubt, tell us what you will use it for and we will recommend the right one on WhatsApp.
What people ask us most before ordering a part. If you do not find your question, message us on WhatsApp.
The price varies with size, material and complexity. At 3D Tech, small PLA parts start at ARS $5,000 (Argentine pesos). Send us your file on WhatsApp for an exact quote.
We work with STL, STEP, 3MF and OBJ files. If you do not have a file, we can model your part from a photo, a drawing or a physical prototype, as long as it is not an artistic piece.
Yes. Within Argentina we ship anywhere with Andreani; ask us about delivery times for your area. Ordering from abroad? Message us on WhatsApp with your country and we will arrange shipping and payment together.
We print mostly in PETG and PLA. We also work with ABS, ASA, TPU and composite filaments with carbon fiber or glass fiber, depending on what each part needs.
PLA is ideal for prototypes, models and decorative parts: it gives very good detail and prints fast, but it softens with heat. PETG resists impact, moisture and water better, so it suits functional parts, replacement parts and nautical accessories.
For most accessories that will be in contact with water and moisture we recommend PETG, the same material our Regatta Strategy Kit is printed in. If the part will be exposed to the sun for long periods, ASA is a good alternative because it resists UV rays.
Yes. With the Snapmaker U1 we print up to four colors in the same part, with clean finishes and little material waste. It is ideal for logos, merchandise and decorative parts.
A part fits in a single print up to 256 mm per side on the Elegoo Centauri Carbon and up to 270 mm per side on the Snapmaker U1. Larger parts are split into sections and joined with a clean finish.
Tell us what you will use it for: whether it goes in water or sun, whether it needs to be flexible or very rigid. With that we recommend the material and how to print it. Message us on WhatsApp or through the contact page.
